High Performance Air Cooled Condenser Heat Exchanger FNV Type For Cold Room

FN Series Cold Room Use Air Cooled Condenser For Refrigeration System

Condenser Description :

FN seroes air - cooled condenser is a kind of special in the open air , semi - closed and totally enclosed compressor condenser . Heat disspation area by 3 , 1380 ㎡ . FN type air cooling condenser FNH and FNV two series . FNH with horizontal air supply type , FNV for vertical air supply type ; FNH model suitable for small and medium - sized close partly or fully enclosed compressor , FNV type is suitable for large amount of cold compressor . FNV type is suitable for large amount of cold compressor . Condenser separately installed on the out outside , and the compressor piping connections between in lieu of water cooled condenser .

Products Feature :

1. Installing of condenser is not confined by area , it only needs small area .
2. Entire installation,beautiful outlook design , protect well , can avoid collision damage .
3. Condensers have double arrange , avoid heat loss during the air transform .
4. The units have good protect system inside , good for reducing maintance .
5. Use axial fan motor , low noise , power lose and large in air flow .
6. Large power of compressors driver quantity of cold .
7. Well construction , convenient packing and transport .

Technical Parameters :

Note : four - pole external rotor fans shall be used for the heat - exchange area less than 210 ㎡ . And six - pole axial flow fans shall be used for the heat - exchange area more than 240 ㎡ .